Qingdao Everise Int’l Co., Ltd.
Home > News > Industry news > Single/Double/Triple Silver Low E Curtain Wall Glass
Float clear glass
Ultra clear glass
Float tinted glass
Float reflective glass
Patterned glass
LowE & SunE glass
Tempered glass
Laminated glass
Acrylic/ PMMA/ Perspex
Insulated glass
Acid etched glass
Decorative painted glass
Stained glass / Painted glass
Glass curtain wall
Fire proof glass
Inlaid glass / Glue chip glass
Glass block

Single/Double/Triple Silver Low E Curtain Wall Glass

Thickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm
Max. Size: 3660x6000mm
Min. Size: 300x800mm
Standard size: 2134x3300mm, 2134x3660mm, 2440x3300mm, 1830x2440mm, 2440x3660mm, 2250x3300mm
Color: Clear, ultra clear, dark grey, euro grey, silver grey, light blue, blue green, green, ocean blue, ford blue, dark blue and other color in different shades, etc.

On line Low-E glass for curtain wall is hard coated and can be used as Mongolic, insulated, laminated, tempered or curved. We have the most advanced Belgium production line which keeps stable and good quality.

On line low-e for curtain wall has a incomparable performance comparing with normal offline soft coated low e glass. Neutural color Low E, grey blue low E are available.

Mongolic glass: On line low-e, sun-e glass is hard coated, and can be used moronically. Coating is on the second face to reach the best performance.

Isulated glass: Suggest locate the low e coated glass face at the face 3# and the SUN-E glass face at the face 2 when composite with a piece of clear glass into IGU. When it processes into isolated glass, it is unnecessary to erase the film at side.

Laminated glass: Must use the uncoated face to composite laminated glass. When it uses moronically, the coated face is suggested at the face 4#. When it is in isolated unit, suggest locate it interior of the IGU.

Tempered glass and heat strengthen glass: As the coat is low effective, the parameter for tempering is different from the normal float glass. Therefore, the process parameter must be revised accordingly. When it is under tempering, the temperature of glass is increasing, please do not make the coated glass face contact the roller to prevent any damage to the coat itself.

Hot curved: As the coat is with low effective feature, the processing parameter is different from normal float glass. The coated face is not recommended to contact the roller to prevent any damage to the coat itself.


Most Viewed Products